top of page
RP-30 Quick Dry Water Stopping Powder

RP-30 Quick Dry Water Stopping Powder

Product Catalog Link

Click here

  • Product Introduction

    RP-30/Quick Dry Cement does not require any additives. Just apply the dry powder to the leak to stop the water flow. RP-30/Quick Dry Cement is a fast-hardening water-stopping powder that can immediately and permanently stop the leak. Whether it is a minor or serious leak, RP-30/Quick Dry Cement can effectively solve it in a very short time.

    RP-30/Quick Dry Cement can harden quickly in 20 seconds. If you spray C-15 Crystal Liquid/Crystallized Water after use, the crystallization will permanently block the pores to effectively prevent water leakage. RP-30/Quick Dry Cement can prevent corrosion, can be used underwater, and can withstand very high water pressure.

  • Product Features

    1. It can harden quickly in 20 seconds and effectively prevent water seepage.
    2. Can be used underwater and can withstand high water pressure.
    3. Apply cement directly to the flooding area to immediately block water.
    4. It is suitable for seepage of underground and above-ground structures, culvert connections, reservoirs, wall-ground joints, etc., and has a wide range of applicability.

  • Product Usage

    1. Water seepage in underground building structures: basements, parking garages, underground passages, elevator rooms, machine rooms, etc.
    2. Waterproof and sealing treatment: water-stopping treatment for telecommunication manholes, culvert extension and connection treatment, water tank leakage treatment, etc.
    3. Waterproofing and waterproofing treatment shall be performed on the base corners where the wall and the ground meet.
    4. Waterproofing and waterproofing treatment for any expansion joints during grouting of the structural surface.

  • Instructions

    1. Make a V-shaped opening at the leaking point.
    2. Take the required amount of RP-30 quick-drying cement, add 1/3 to 1/2 of clean water, and then stir evenly.
    3. Shape the RP-30 quick-drying cement into a cone shape and feel its temperature in your palm.
    4. Squeeze RP-30 quick-drying cement into the V-shaped opening, hold for about 30 seconds, then release it and smooth the surface with a spatula.

  • Product packaging

    RP-30 Quick Dry Water Stopping Powder

    20KG plastic barrel packaging

Related Products

bottom of page