F-15P Inject-Seal Crystallization Powder

Inject-Seal/crystallization powder is an active cement-based multifunctional crystalline waterproof material developed with the latest technology. Active silicon reacts with free calcium in concrete to produce needle-shaped crystals of silicate, which fill the pores of concrete to achieve a waterproof effect. Cement-based construction is simple and unaffected by moisture. It can be applied even in wet conditions, solving all your traditional waterproof material complex construction problems at once. You will no longer lose the right to enjoy a clean and comfortable life due to poor material selection.

Inject-Seal/crystallization powder is a strong cement-based waterproof material that can form a dense and effective waterproof and protective layer, effectively penetrate into the body to crystallize, and can be used regardless of positive or negative water pressure. It is especially suitable for waterproof projects that need to be in contact with water for a long time, such as water tanks, raft foundations, fish ponds, swimming pools, building basement exterior walls and continuous walls, etc.

1. Inject-Seal/Crystallization powder is a cement-based coating that can easily integrate with the structure; it can also penetrate into the body and increase the density of the concrete.

2. Easy to construct. No special instruments or equipment are required when using Inject-Seal/crystallization powder. The simple operation method can save labor.

3. It is a non-toxic waterproof material that can be widely used in drinking water equipment.

4. Due to its filling and sealing properties, it can be used on rough surfaces with pinholes to ensure that water will not penetrate.

1.適用於與水長期接觸的防水工程，如水箱、筏基、魚池、游泳池、一般建築物地下室外牆或連續壁等。 2.亦適用須具有環保標準之場合，例如水塔、蓄水池、輸水管線甚至於水壩工程等。 3.其他一般防水工程，如建築物內外牆、花台水池等等。

1. Pre-treatment before construction (removal of oil stains, inferior structures, water-stopping repairs)

2. Spray water to moisten the surface

3. First coat of primer

4. First waterproof coating

5. Spray again the next day to moisten the surface.

6. Second waterproof coating

F-15P Inject-Seal Crystallization Powder

25KG plastic barrel packaging